The image shows the Salt Multi Universal Front Hub Guard, which includes four black zip ties and two circular black plastic mounts made from injected nylon fiberglass composite, featuring several holes and slots around their circumference, likely used for securing objects together.

Close-up image of a bicycle wheel hub featuring the Salt Multi Universal Front Hub Guard in black, surrounded by several black spokes radiating from the center. The central hub, strengthened with an injected nylon fiberglass composite, is cyan blue with clear engravings and a protruding axle.

Close-up of a bicycle wheel hub showcasing the Salt Multi Universal Front Hub Guard with a blue center part and black spokes radiating outward, featuring an injected nylon fiberglass composite for enhanced durability.

Description

The Salt Multi is a universal hub guard that zip ties to the wheel rather than bolting to one particular hub. It fits most front hubs with flanges smaller than 58mm outside diameter, and some rear hubs as well, provided the wheel is 36 hole with a three cross spoke pattern.

It is made from injected nylon fibreglass composite and measures 83mm outside diameter, 34mm inside diameter and 16mm deep. Thicker 6mm zip ties sit in a sunken channel so grinds wear the guard rather than the ties, and spoke support struts stop the guard rotating on the wheel.

Features

Fits most front hubs. Designed for front hubs with flanges smaller than 58mm outside diameter, and it works on some rear hubs too.
Made for 36h, three cross. The strut layout matches a 36 hole wheel laced three cross, so check your build before ordering.
Injected nylon fibreglass composite. A super strong moulded composite that takes the grind instead of your hub flange.
Sunken zip-tie system. The thicker 6mm ties sit below the surface, so ledges wear the guard and leave the ties alone.
Spoke support struts. The struts brace against the spokes to stop the guard rotating once it is on.