SD Ace Pro Bolt On Front Hub / Black / 36H/10mm

Highlights

Sealed cartridge bearings
10mm bolt on axle
36 hole shell
CNC machined aluminium shell

Description

The SD Ace Pro Front Hub with 10mm axle bolts feature sealed cartridge bearings, a CNC machined aluminium hub shell and a alloy axle with CrMo bolts.

Features

Sealed cartridge bearings. Sealed bearings keep grit and water out, so the front wheel keeps rolling smoothly through a wet winter.
10mm bolt on axle. An alloy axle with chromoly bolts, so it clamps up tight in the fork without carrying much weight.
36 hole shell. Standard 36 hole drilling, so any wheelbuilder can lace it to the rim you want with off the shelf spokes.
CNC machined aluminium shell. Machined from aluminium to keep weight off the front wheel, where you feel it most.
100mm locknut to locknut. Standard front spacing, so it drops into a normal fork without hunting for spacers.

Specifications

Fits: Front, 10mm bolt on
Width: 100mm locknut to locknut
Material: CNC machined aluminium shell
Bearings: Sealed cartridge
Hole count: 36
Axle: Alloy with chromoly bolts
Axle size: 10mm
Note: Flange diameter 38mm, flange to locknut 16mm

Spoke calculator

Display

Pick the part it is laced to and we will give you the lengths to buy.

This hub

Looking up its measurements.

Check or change its figures

Hub spacing locknut to locknut, 100 front or 110 rear on most BMX mm Same both sides front hubs, or matching flanges

Flange diameter/PCD (pitch circle diameter) spoke hole centre to the opposite hole centre. The drive side is the driver side, left or right hand drive alike, and is usually the bigger flange

Drive side mm Non-drive side mm

Flange position

Flange to locknut Centre to flange

Drive side mm Non-drive side mm

Laced to which rim?

Find your rim

Or type its figures

ERD effective rim diameter, from the spec sheet mm