• Éclat Shift hybrid rear hub. Convertible internals let you run it as a freecoaster or a cassette, so one bike covers both ways of riding.
• Full chromoly frame, fork and bars. The Trust frame is 4130 full chromoly with tapered seat and chainstays, matched to a Salt+ Trust fork and two-piece bar.
• Wide 2.35" Activate tyres. Wethepeople Activate tyres on double wall Éclat Trippin rims give you grip and a bit of cushion on rough ground.
• Brakes you can strip off. The Éclat Talon rear U-brake, the brake pivots and guides and the gyro tabs all come off when you want a clean frame.
• Guarded sprocket and hub guards. The Paragon 25t sprocket runs a nylon guard, and nylon fibreglass hub guards are fitted front and rear for grinding.

• Size: 20" wheels, 21" top tube
• Frame: Wethepeople Trust, 4130 full chromoly, tapered seat and chainstays, removable brake pivots and guides, 127mm head tube
• Top tube: 21"
• Chainstay: 13.2"
• Head tube angle: 75.5°
• Seat tube angle: 71°
• Standover: 9"
• Bottom bracket height: 11.7"
• Fork: Salt+ Trust, 4130 full chromoly, butted chromoly steerer, 15mm offset
• Headset: Salt Pro integrated, sealed bearing
• Stem: Wethepeople Hydra topload, CNC alloy, 50mm reach, 36mm rise
• Bars: Salt+ Trust, 2-piece, 4130 full chromoly, curved crosstube, 9.25" rise, 29.25" width, 12° backsweep, 2.5° upsweep
• Grips: Éclat Shogun, flangeless
• Bar ends: Éclat TECH-BOLT bar ends
• Brakes: Éclat Talon aluminium U-brake, rear, with holes for removable gyro tabs
• Brake lever: Salt Moto, aluminium
• Cranks: Salt+ Elite tubular 3-piece, left and right, chromoly, 170mm, 48 spline
• Bottom bracket: Salt MID, 19mm, press fit, sealed bearing
• Sprocket: Wethepeople Paragon with nylon guard, 6061-T6 aluminium, 25t
• Chain: Wethepeople Supply, Z510HX type
• Pedals: Éclat Centric, nylon fibreglass
• Front hub: Éclat Cortex, fully sealed, 3/8" female bolts, 36h
• Rear hub: Éclat Shift, fully sealed, Hybrid System convertible internals, 9t drive, 14mm hollow axle, 36h
• Rear cog: 1-piece driver, 9t, sealed bearing, set up as freecoaster
• Rims: Éclat Trippin, double wall, 36h, front and rear
• Tyres: Wethepeople Activate, 2.35", 100P
• Seat: Éclat Bios pivotal, fat padded
• Seat post: Salt AM pivotal, 150mm, aluminium
• Seat clamp: Wethepeople Logic, 4130 chromoly
• Note: Éclat hub guards, two front and two rear, nylon fibreglass. All bearings sealed.

Your bike ships mostly assembled in the box. Finishing it takes most people 10 to 20 minutes with basic tools, and the video above walks through every step.

• Fit the handlebars and line them up with the front wheel
• Fit the front wheel, pedals and seat post
• Check the brakes and tyre pressure before the first ride

Tools: Allen key set and a 15mm, 17mm or 19mm spanner for the pedals and axle nuts (bikes can vary between these three sizes). A socket is needed if installing pegs.

Rather have it done? Ask us about extra assembly before you order, or any local bike shop can finish the build for a small fee.