The Division Blitzer 12 Inch Bike is a small purple kids BMX with black tires, padded seat, and white "Blitzer" branding on the frame—ideal as a first BMX bike for young riders.
The Division Blitzer 12 Inch Bike is a small black BMX with thick tires and bold white "BLITZER" branding on the frame, shown in profile against a white background. Ideal for kids and beginner or aspiring freestyle BMX riders.
The Division Blitzer 12 Inch Bike is a small purple kids' BMX with black training wheels, thick tires, black handlebars, and "BULLER" on the frame, shown against a white background.
Close-up of the Division Blitzer 12 Inch Bike in purple, featuring the handlebars, brake lever, seat, and part of the frame against a white background.
Close-up of the rear wheel, brake, chain, and seat of the Division Blitzer 12 Inch Bike in purple, showcasing detailed frame components designed for young riders.
Close-up of a black pedal attached to the crank arm, with part of the chainring, chain, and a wheel visible—ideal for the Division Blitzer 12 Inch Bike.
Close-up of the Division Blitzer 12 Inch Bike in purple, featuring labeled frame, pedal, crank, chain, rear seat, and front tire—ideal for young riders seeking a stylish kids’ BMX.
Close-up of the Division Blitzer 12 Inch Bike's rear wheel, showing the black hub, gear cog, spokes, and a section of its purple freestyle BMX frame.
Close-up of the Division Blitzer 12 Inch Bike's black handlebar stem with visible bolts, mounted on its purple freestyle BMX frame.
The Division Blitzer 12 Inch Bike is a small purple BMX with black handlebars, seat, and tires—ideal for kids’ freestyle riding—shown on a plain white background.
The Division Blitzer 12 Inch Bike is a small black kids’ BMX with training wheels, thick tires, a padded seat, and upright handlebars, shown against a white background.
Close-up of the Division Blitzer 12 Inch Bike’s black handlebars, seat, and front brake cable against a white background—ideal for young freestyle BMX riders.
Close-up of the Division Blitzer 12 Inch Bike in black, highlighting the rear wheel, tire tread, chain, pedal, seat, and brake mechanism.
Close-up of the black crank, chainring, chain, and a rectangular plastic pedal next to the tire on the Division Blitzer 12 Inch Bike.
Close-up view of the Division Blitzer 12 Inch Bike's front wheel hub, showing spokes, axle nut, tire, and fork—ideal for kids' BMX or freestyle BMX riding.
Close-up of the Division Blitzer 12 Inch Bike's rear wheel, displaying the tire, spokes, gear cog, chain, and axle against a white background.
Close-up of the Division Blitzer 12 Inch Bike's black kids BMX seat with white stitching and red logo on a black frame. Pedals and rear tire are partially visible.
Close-up of the Division Blitzer 12 Inch Bike's black freestyle BMX handlebar stem with four mounting bolts and visible branding, ideal for kids BMX or a 12” BMX bike.
Close-up view of the Division Blitzer 12 Inch Bike’s black rear wheel, tire, chain, and frame, highlighting detailed gear and brake components.
The Division Blitzer 12 Inch Bike is a small black BMX with thick tires, padded seat, and white "DEFLECT" branding on the frame—ideal for kids’ BMX adventures and freestyle tricks. Shown on a white background.

Highlights

  • A first step into freestyle BMX
  • Proper 3-piece chromoly cranks
  • Sealed hubs, 9T cassette
  • Grippy 2.3" tyres, training wheels included

Description

The Division Blitzer 12” is the perfect first step into freestyle BMX. Built tough with a Hi-Ten frame and dialled geometry, it’s made for everything from driveway sessions to cruising to school. A proper 3-piece CrMo crank, sealed hubs, and a lightweight 12” setup keep it smooth, strong, and easy to handle for young riders finding their flow. Complete with grippy 2.3” tyres and included training wheels, the Blitzer is all about building confidence and having fun—right from the first pedal.

Features
  • A first step into freestyle BMX. Hi-Ten frame with dialled geometry, 11.9" top tube and 9.4" chainstays, made for everything from driveway sessions to cruising to school.
  • Proper 3-piece chromoly cranks. 90mm three piece chromoly cranks on a sealed mid bottom bracket: a proper BMX drivetrain, kept strong and smooth.
  • Sealed hubs, 9T cassette. Division alloy sealed bearing hubs front and rear, the rear a 9T cassette, keep it rolling smooth and strong for young riders finding their flow.
  • Grippy 2.3" tyres, training wheels included. Family F641 12 x 2.3" tyres on 28-hole alloy rims with black stainless spokes, plus training wheels in the box for building confidence from the first pedal.
  • Light and easy to handle. A 9.5 kg 12" setup with 5.0" rise Hi-Ten bars, a 40mm forged alloy top load stem and a Division railed seat on a 25.4mm steel post.

Specifications
  • Size: 12" wheels, 11.9" top tube
  • Frame: Division Blitzer hi-tensile steel
  • Chainstay: 9.4"
  • Head tube angle: 75°
  • Seat tube angle: 71°
  • Fork: Division hi-tensile steel, tapered legs, 1-1/8" steerer
  • Headset: 1-1/8" external
  • Stem: Division forged alloy top load, 40mm reach
  • Bars: Division hi-tensile steel, 5.0" rise, 20.0" wide
  • Grips: Division
  • Cranks: Chromoly 3-piece, 90mm
  • Bottom bracket: Sealed mid
  • Sprocket: Division 25T
  • Chain: KMC
  • Pedals: Plastic
  • Front hub: Division alloy, sealed bearings, 3/8" axle
  • Rear hub: Division alloy sealed bearing cassette, 9T driver, 3/8" axle
  • Spokes: Black stainless
  • Rims: 12" alloy single wall, 28H
  • Tyres: Family F641 12 x 2.3"
  • Seat: Division railed
  • Seat post: Steel, 25.4mm
  • Weight: 9.5 kg
  • Note: Training wheels included.

Assembly information

Your bike ships mostly assembled in the box. Finishing it takes most people 10 to 20 minutes with basic tools, and the video above walks through every step.

  • Fit the handlebars and line them up with the front wheel
  • Fit the front wheel, pedals and seat post
  • Check the brakes and tyre pressure before the first ride

Tools: Allen key set and a 15mm, 17mm or 19mm spanner for the pedals and axle nuts (bikes can vary between these three sizes). A socket is needed if installing pegs.

Rather have it done? Ask us about extra assembly before you order, or any local bike shop can finish the build for a small fee.

Division Blitzer 12 Inch Bike

Brand: Division BMX SKU:

$449.99 AUD

Or 4 payments of $112.49 AUD with

Recommended Rider Height: 60 to 91 cm

Colour - Black

Top Tube Length - 12

12 inch BMX sizing

A 12 inch bike suits a rider of about 60 to 91cm, usually 2 to 4 years old, on a 12 to 12.5 inch top tube. It is the first bike after a balance bike.

Rider heightWheel sizeTop tube
60 to 91cm12"12 to 12.5"
81 to 106cm14"14 to 14.5"
96 to 122cm16"16 to 16.5"
122 to 147cm18"18 to 18.5"
147 to 157cm20"19.75 to 20.25"
157 to 168cm20"20 to 20.5"
168 to 175cm20"20.25 to 20.75"
175 to 183cm20"20.5 to 21"
183 to 190cm and up20"20.75 to 21.5"
160cm and up22"21 to 22.25"
160cm and up24"21.75 to 22"
160cm and up26"22 to 23"

Sizes overlap on purpose, so personal preference comes into it. At this wheel size the top tube barely changes the fit: go by height, and check they can stand over the bike flat footed.

How to measure

Stand your rider against a wall in the shoes they ride in, heels flat, and mark the top of their head. Measure from the floor to the mark.

  • Between two wheel sizes? Go up. Kids grow into a bike far faster than they grow out of the fun.
  • They should be able to stand over the top tube with both feet flat on the ground.

Not sure? Send us their height and we will tell you what we would put them on.

Read the full buying guide

12 inch BMX sizing

A 12 inch bike suits a rider of about 60 to 91cm, usually 2 to 4 years old, on a 12 to 12.5 inch top tube. It is the first bike after a balance bike.

Rider heightWheel sizeTop tube
60 to 91cm12"12 to 12.5"
81 to 106cm14"14 to 14.5"
96 to 122cm16"16 to 16.5"
122 to 147cm18"18 to 18.5"
147 to 157cm20"19.75 to 20.25"
157 to 168cm20"20 to 20.5"
168 to 175cm20"20.25 to 20.75"
175 to 183cm20"20.5 to 21"
183 to 190cm and up20"20.75 to 21.5"
160cm and up22"21 to 22.25"
160cm and up24"21.75 to 22"
160cm and up26"22 to 23"

Sizes overlap on purpose, so personal preference comes into it. At this wheel size the top tube barely changes the fit: go by height, and check they can stand over the bike flat footed.

How to measure

Stand your rider against a wall in the shoes they ride in, heels flat, and mark the top of their head. Measure from the floor to the mark.

  • Between two wheel sizes? Go up. Kids grow into a bike far faster than they grow out of the fun.
  • They should be able to stand over the top tube with both feet flat on the ground.

Not sure? Send us their height and we will tell you what we would put them on.

Read the full buying guide

Division Blitzer 12 Inch Bike - Black / 12

$449.99 AUD

Price match request

  • Arrives mostly assembled. Most people finish it in 10 to 20 minutes.
  • Pay in 4 with PayPal on orders under $2,000: 4 interest-free payments of $112.49, one every two weeks, with no late fees. How it works

Bike shipping from $24.99All rates

Free in-store pickup - Brisbane

Availability

11.912
Gloss Black
Black
Metal Purple

● In stock at LUXBMX ● With supplier ● Preorder ○ Sold out

Need Help ?

Chat with the LUXBMX crew!

Email Us Call Us SMS Us
  • 100% Australian owned
  • Australia's largest BMX range
  • Hassle-free returns
  • Fast trackable shipping

WE ALSO RECOMMEND:

S-One Mini Lifer Helmet / Matte Black / XS
A guide detailing the features of the S-One Mini Lifer Helmet / Matte Black, including EPS Fusion Foam, sweat-absorbing liners, and a sizing chart with instructions on selecting the correct certified multi-impact helmet size.
Infographic displaying three different S-One Mini Lifer Helmet / Matte Black models with sizing options, color-coded liners, and detailed descriptions for the Mini Lifer helmet (fits 18.5"-20.5"), Lifer (20.5"-23.5"), and Mega Lifer (23"-25"). Each certified multi-impact helmet features durable EPS Fusion Foam for enhanced protection.
S-One Mini Lifer Helmet / Matte Black

$89.99 AUD

Matte Black
XSSMLXLXXLXXXL
A black multi-impact helmet with a speckled design, featuring the "S1" logo on the front left side and an adjustable chin strap with a red clip. This S-One Helmet Mini Lifer Black Gloss Glitter is constructed with EPS Fusion Foam for superior protection.
Diagram of S1 Lifer Helmet features: EPS Fusion Foam, sweat-absorbing liner, and helmet sizing chart. The chart offers size recommendations based on head circumference. Also available in the S-One Helmet Mini Lifer Black Gloss Glitter for a perfect multi-impact helmet option.
A black S-One Helmet Mini Lifer Black Gloss Glitter with a glittery finish, visor holes, and an adjustable black strap. The multi-impact helmet features EPS Fusion Foam and white "S1" branding on the side and on the strap.
A black S-One Helmet Mini Lifer Black Gloss Glitter helmet with a textured speckled design and a white "S1" logo on the side. It features air vents, adjustable chin straps, and durable EPS Fusion Foam for multi-impact protection.
Diagram explaining the S-One Helmet Mini Lifer Black Gloss Glitter, a multi-impact helmet featuring EPS Fusion Foam. It showcases 3 shell sizes, adjustable liners, and various color-coded liner thickness options. Images of the helmet's front, back, interior, and orthographic views included.
S-One Helmet Mini Lifer Black Gloss Glitter

$109.99 AUD

Glitter
XSSMLXLXXLXXXL
A white S-One Mini Lifer Helmet with the word sz on it, offering certified high impact protection.
Chart detailing the S1 Lifer Helmet sizes, including an internal view of the helmet and sizing instructions. Features EPS Fusion Foam, sweat-absorbing liner, and various certification standards. Also available: S-One Mini Lifer Helmet / Gloss White with Certified Multiple Impact Protection for smaller heads.
Infographic showcasing the S-One Mini Lifer Helmet / Gloss White in three shell sizes with descriptions of sizing liners and helmet measurements. Features front, back, and interior views. Includes S1 Mini, Lifer, and Mega Lifer models with certified multiple impact protection. Free sizing kits available.
S-One Mini Lifer Helmet / Gloss White

$89.99 AUD

Gloss White
SMXSLXL
A S-One Helmet Mini Lifer Silver Gloss Glitter with a black interior padding, featuring the logo "S1". It incorporates EPS Fusion Foam for multi-impact protection, multiple ventilation holes, and an adjustable chin strap with a red buckle.
An infographic showcasing S-One Helmet Mini Lifer Silver Gloss Glitter features and a size guide chart. It includes EPS Fusion Foam technology details, sweat-absorbing liners, and a step-by-step size selection process with measurements.
The S-One Helmet Mini Lifer Silver Gloss Glitter, featuring ventilation holes and a black adjustable strap with red clasps, is designed for head protection and boasts EPS Fusion Foam for enhanced safety.
A sparkly silver S-One Helmet Mini Lifer Silver Gloss Glitter with black straps and a red buckle, featuring the "S-ONE" logo on the adjustable chin strap and the "S1" logo on the side. This multi-impact helmet is equipped with EPS Fusion Foam for superior protection.
A comparison chart of S1 Lifer and S-One Helmet Mini Lifer Silver Gloss Glitter helmets showing different shell sizes, liner thicknesses, and head circumference fit. Includes a diagram of multi-impact helmet construction featuring EPS Fusion Foam and available helmet colors.
S-One Helmet Mini Lifer Silver Gloss Glitter

$109.99 AUD

Glitter
XSSMLXLXXLXXXL

Price match request

Seen it cheaper somewhere else? Send us the link and we'll take a look.