Kink Coast 12 Bike (2022) / Gloss Digital Blue / 12TT

Description

Kink Coast 12 Bike (2022)

Kick back and have a blast watching your little ones coasting around on the Kink Coast! A terrific beginners bike that is perfect for learning balance and the skills necessary for having a hoot on two wheels! These little sleds have been decked out with loads of great parts to ensure that the ride quality is top notch when the youngins are scuttling around the pavement! Mission Micro Grips, Mission Frontload Stem, Mission Tracker Tyres and loads more make this a very special first bike!


Helmets are a priority- So make sure your kids have one and wear it!

Features
  • A first bike for learning balance. No cranks, chain or pedals to manage: little ones push along, coast and pick up the skills for having a hoot on two wheels.
  • Low 4.5" standover. 12" top tube, 7.5" chainstays and a 74° head angle on a 100% hi-ten steel frame with a Kink Lance tapered-leg fork.
  • Mission cockpit, kid sized. Mission Micro grips with closed bar ends, a Mission front load 30mm stem and Kink T500 5" hi-ten bars, so ride quality stays top notch.
  • Mission Tracker 12x2.25 tyres on X7 rims. 20-hole Mission X7 rims laced to Mission unsealed hubs on 3/8" axles, with Mission Tracker tyres for scuttling around the pavement.
  • Decked out with great parts. Mission Weider combo seat on a combo steel post with a Mission Slim clamp, and a standard 1 1/8" threadless headset up front.

Specifications
  • Size: 12" wheels
  • Frame: 100% hi-ten steel
  • Top tube: 12"
  • Chainstay: 7.5"
  • Head tube angle: 74°
  • Seat tube angle: 70°
  • Standover: 4.5"
  • Fork: Kink Lance, 100% hi-ten steel, tapered legs
  • Headset: Standard 1 1/8" threadless
  • Stem: Mission front load, 30mm
  • Bars: Kink T500 5", 100% hi-ten steel
  • Grips: Mission Micro
  • Bar ends: Closed end
  • Front hub: Mission unsealed, 3/8" axle
  • Rear hub: Mission unsealed, 3/8" axle
  • Rims: Mission X7, 20H
  • Tyres: Mission Tracker 12x2.25
  • Seat: Mission Weider combo
  • Seat post: Mission combo steel post
  • Seat clamp: Mission Slim
  • Note: No brake, cranks, chain or pedals fitted: a push-along bike for learning balance

Assembly information

Your bike ships mostly assembled in the box. Finishing it takes most people 10 to 20 minutes with basic tools, and the video above walks through every step.

  • Fit the handlebars and line them up with the front wheel
  • Fit the front wheel, pedals and seat post
  • Check the brakes and tyre pressure before the first ride

Tools: Allen key set and a 15mm, 17mm or 19mm spanner for the pedals and axle nuts (bikes can vary between these three sizes). A socket is needed if installing pegs.

Rather have it done? Ask us about extra assembly before you order, or any local bike shop can finish the build for a small fee.

Kink Coast 12 Inch Bike

Brand: Kink SKU:

From

$348.99 AUD

 $349.99 AUD

Or 4 payments of $87.24 AUD with

Recommended Rider Height:

60-91cm

Colour - Gloss Digital Blue

Top Tube Length - 12

12 inch BMX sizing

A 12 inch bike suits a rider of about 60 to 91cm, usually 2 to 4 years old, on a 12 to 12.5 inch top tube. It is the first bike after a balance bike.

Rider heightWheel sizeTop tube
60 to 91cm12"12 to 12.5"
81 to 106cm14"14 to 14.5"
96 to 122cm16"16 to 16.5"
122 to 147cm18"18 to 18.5"
147 to 157cm20"19.75 to 20.25"
157 to 168cm20"20 to 20.5"
168 to 175cm20"20.25 to 20.75"
175 to 183cm20"20.5 to 21"
183 to 190cm and up20"20.75 to 21.5"
160cm and up22"21 to 22.25"
160cm and up24"21.75 to 22"
160cm and up26"22 to 23"

Sizes overlap on purpose, so personal preference comes into it. At this wheel size the top tube barely changes the fit: go by height, and check they can stand over the bike flat footed.

How to measure

Stand your rider against a wall in the shoes they ride in, heels flat, and mark the top of their head. Measure from the floor to the mark.

  • Between two wheel sizes? Go up. Kids grow into a bike far faster than they grow out of the fun.
  • They should be able to stand over the top tube with both feet flat on the ground.

Not sure? Send us their height and we will tell you what we would put them on.

Read the full buying guide

12 inch BMX sizing

A 12 inch bike suits a rider of about 60 to 91cm, usually 2 to 4 years old, on a 12 to 12.5 inch top tube. It is the first bike after a balance bike.

Rider heightWheel sizeTop tube
60 to 91cm12"12 to 12.5"
81 to 106cm14"14 to 14.5"
96 to 122cm16"16 to 16.5"
122 to 147cm18"18 to 18.5"
147 to 157cm20"19.75 to 20.25"
157 to 168cm20"20 to 20.5"
168 to 175cm20"20.25 to 20.75"
175 to 183cm20"20.5 to 21"
183 to 190cm and up20"20.75 to 21.5"
160cm and up22"21 to 22.25"
160cm and up24"21.75 to 22"
160cm and up26"22 to 23"

Sizes overlap on purpose, so personal preference comes into it. At this wheel size the top tube barely changes the fit: go by height, and check they can stand over the bike flat footed.

How to measure

Stand your rider against a wall in the shoes they ride in, heels flat, and mark the top of their head. Measure from the floor to the mark.

  • Between two wheel sizes? Go up. Kids grow into a bike far faster than they grow out of the fun.
  • They should be able to stand over the top tube with both feet flat on the ground.

Not sure? Send us their height and we will tell you what we would put them on.

Read the full buying guide
$348.99 AUD

Price match request

Kink Coast 12 Inch Bike - Gloss Digital Blue / 12

Metro bike shipping from $19.99

Regional and remote rates may differ

Free in-store pickup - Brisbane

Need Help ?

Chat with the LUXBMX crew!

Email Us Call Us SMS Us
  • 100% Australian owned
  • Australia's largest BMX range
  • Hassle-free returns
  • Fast trackable shipping

WE ALSO RECOMMEND:

S-One Mini Lifer Helmet / Matte Black / XS A guide detailing the features of the S-One Mini Lifer Helmet / Matte Black, including EPS Fusion Foam, sweat-absorbing liners, and a sizing chart with instructions on selecting the correct certified multi-impact helmet size.
S-One Mini Lifer Helmet / Matte Black

$89.99 AUD

Matte Black
XSSMLXLXXLXXXL
A black multi-impact helmet with a speckled design, featuring the "S1" logo on the front left side and an adjustable chin strap with a red clip. This S-One Helmet Mini Lifer Black Gloss Glitter is constructed with EPS Fusion Foam for superior protection. Diagram of S1 Lifer Helmet features: EPS Fusion Foam, sweat-absorbing liner, and helmet sizing chart. The chart offers size recommendations based on head circumference. Also available in the S-One Helmet Mini Lifer Black Gloss Glitter for a perfect multi-impact helmet option.
S-One Helmet Mini Lifer Black Gloss Glitter

$109.99 AUD

Glitter
XSSMLXLXXLXXXL
A white S-One Mini Lifer Helmet with the word sz on it, offering certified high impact protection. Chart detailing the S1 Lifer Helmet sizes, including an internal view of the helmet and sizing instructions. Features EPS Fusion Foam, sweat-absorbing liner, and various certification standards. Also available: S-One Mini Lifer Helmet / Gloss White with Certified Multiple Impact Protection for smaller heads.
S-One Mini Lifer Helmet / Gloss White

$89.99 AUD

Gloss White
SMXSLXL
A S-One Helmet Mini Lifer Silver Gloss Glitter with a black interior padding, featuring the logo "S1". It incorporates EPS Fusion Foam for multi-impact protection, multiple ventilation holes, and an adjustable chin strap with a red buckle. An infographic showcasing S-One Helmet Mini Lifer Silver Gloss Glitter features and a size guide chart. It includes EPS Fusion Foam technology details, sweat-absorbing liners, and a step-by-step size selection process with measurements.
S-One Helmet Mini Lifer Silver Gloss Glitter

$109.99 AUD

Glitter
XSSMLXLXXLXXXL