Odyssey Vandero Pro Front Hub / Black 36h

A silver Odyssey Vandero Pro Front Hub with black-compatible hub guards on both sides and sealed bearings, shown against a white background.

The Odyssey Vandero Pro Front Hub in black features an aluminum shell, sealed bearings, and is compatible with dual replaceable plastic hubguards.

Highlights

Sealed cartridge bearings
7075-T6 alloy shell
Guard compatible, guards included
36 hole drilling

Description

Odyssey's beloved Vandero hub is back and better than ever in the form of the Odyssey Vandero Pro Front Hub. The new Vandero PRO hub is a high quality, sealed hub with in-bound axle bolts that is guard compatible (both included).

36-Hole Spoke Configuration

About the Brand

Odyssey BMX is dedicated to quality and innovation. Odyssey has been a major player in the BMX industry for a long time now and has produced some of the most iconic and groundbreaking parts in the sport's history.

Features

Sealed cartridge bearings. 6903RS sealed cartridge ball bearings keep the grit out so the front wheel keeps rolling freely.
7075-T6 alloy shell. The hub shell is 7075-T6 aluminium, a harder alloy for the part that takes the beating.
Guard compatible, guards included. It runs in-bound axle bolts and is guard compatible, with both included, so you can grind straight away.
36 hole drilling. Drilled 36 hole with a 41.5mm flange, so it laces to a standard BMX rim.
100mm axle width. Measures 100mm locknut to locknut with 3/8 inch x 24TPI bolts, so it sits in standard front dropouts.

Specifications

Fits: 100mm front dropouts (locknut to locknut)
Material: 7075-T6 aluminium hub shell
Bearings: 6903RS sealed cartridge ball bearings
Hole count: 36
Axle: In-bound axle bolts
Thread: 3/8in x 24TPI bolts
Included: Hub guards (both included)
Note: Flange diameter 41.5mm, flange to locknut 22mm

Spoke calculator

Display

Pick the part it is laced to and we will give you the lengths to buy.

This hub

Looking up its measurements.

Check or change its figures

Hub spacing locknut to locknut, 100 front or 110 rear on most BMX mm Same both sides front hubs, or matching flanges

Flange diameter/PCD (pitch circle diameter) spoke hole centre to the opposite hole centre. The drive side is the driver side, left or right hand drive alike, and is usually the bigger flange

Drive side mm Non-drive side mm

Flange position

Flange to locknut Centre to flange

Drive side mm Non-drive side mm

Laced to which rim?

Find your rim

Or type its figures

ERD effective rim diameter, from the spec sheet mm