Stay Strong Reactiv Front Hub / Black / 36H / 20mm

Highlights

Fully sealed bearings
20mm hollow thru axle
36 hole drilling
294g on the scales

Description

The Stay Strong Reactiv front hub is an alloy, fully sealed 20mm front hub drilled 36 hole. The hollow thru axle keeps the weight at 294g, which is where a lot of the appeal sits for a race front end.

It comes in black with the new Stay Strong branding on the hub shell. Being 20mm front, it suits forks and wheels already built around that axle standard.

Features

Fully sealed bearings. Sealed bearings keep dirt and water out of the hub, so it keeps rolling through wet gate practice.
20mm hollow thru axle. The hollow 20mm axle is the reason it comes in at 294g, so check your forks take a 20mm front.
36 hole drilling. Thirty six spokes is the usual race count, so lacing it into a wheel is straightforward.
294g on the scales. At 294g it keeps the weight off the front wheel, where you notice it most out of the gate.
Alloy shell in black. The alloy shell comes in black with the new Stay Strong branding on it.

Specifications

Material: Alloy
Bearings: Fully sealed
Hole count: 36 hole
Axle: 20mm hollow thru axle
Weight: 294g
Colour: Black

Spoke calculator

Display

Pick the part it is laced to and we will give you the lengths to buy.

This hub

Looking up its measurements.

Check or change its figures

Hub spacing locknut to locknut, 100 front or 110 rear on most BMX mm Same both sides front hubs, or matching flanges

Flange diameter/PCD (pitch circle diameter) spoke hole centre to the opposite hole centre. The drive side is the driver side, left or right hand drive alike, and is usually the bigger flange

Drive side mm Non-drive side mm

Flange position

Flange to locknut Centre to flange

Drive side mm Non-drive side mm

Laced to which rim?

Find your rim

Or type its figures

ERD effective rim diameter, from the spec sheet mm